搜索



赛默飞世尔科技为您服务
联系销售
联系技术与支持
相关产品列表
产品类别- 病理学设备 >>大体标本取材台 >>
点击放大
Shandon Grosslab™ 初级病理取材台
  • Stainless steel construction.
  • Stand-alone or benchtop models.
  • Three efficient ventilation options.  
  • Bench-top models are ergonomically designed to be low to the counter.
  • Abundant fluorescent light is directed to the work surface.
  • Rapid positive drainage.
  • Vacuum breaker-protected water supply.
  • Hands-free faucet control on selected benchtop models uses an infrared signal to activate cold water; also has manual override capability.
  • Three air processing options: Recirculating, External Exhaust, or Remote Exhaust.
  • Fume removal is efficient and quiet.
  • Noise levels measure less than 65 decibels.
  • Appliances plug into the unit for convenient use.
  • Two hospital-grade duplex ground fault circuit interrupter (GFCI) receptacles on 110-120V units.
  • Four IEC 320 receptacles on 220-240V units.
  • Facility-supplied residual current device (RCD) is required for 220-240V units.
  • Back draft design for efficient capture of fumes across the work surface.
  • Programmable microprocessor allows clock time to be changed or the filter replacement alarm to be reset.
  • Flat stainless steel work surfaces include three removable perforated grid plates on bench-top models.
  • Each unit comes complete with a magnetic tool bar, two integral centimeter rulers, tea strainer, and paper towel dispenser.
  • Installation is quick and easy.
  • Movable acrylic splash shield protects the user from sprays and splashes while dissecting specimens.
  • Bench-top models can be configured as stand-alone units with the use of the optional stand (No. 10456).
Choosing the Exhaust System to Fit Your LabRecirculatingFor existing labs or labs without facility exhaust, it may be necessary to filter and recirculate the air. Specify a unit with integral blowers or filters.External ExhaustFor distances that do not exceed 20 feet (6.1 m), you may choose a unit with integral blower and filters that may be connected to your facility’s duct for venting.Remote ExhaustIf your facility can supply an exhaust duct and remote blower system that provides an airflow of 550 to 600 cfm (0.260 to 0.283 cu. m/s), a ducted unit will best suit your needs.
 Product# Price  Description  Type  Voltage  
           
 9600      -    Benchtop  Recirculating  110-120V, 60 Hz, 1 Ph   SELECT  
 96001      -    Benchtop  External exhaust  110-120V, 60 Hz, 1 Ph   SELECT  
 96002      -    Benchtop  Remote exhaust  110-120V, 60 Hz, 1 Ph   SELECT  
 960022      -    Benchtop  Recirculating  220-240V, 50/60 Hz, 1 Ph   SELECT  
 9600122      -    Benchtop  External exhaust  220-240V, 50/60 Hz, 1 Ph   SELECT  
 9600222      -    Benchtop  Remote exhaust  220-240V, 50/60 Hz, 1 Ph   SELECT  
 96003      -    Stand-alone  Recirculating  110-120V, 60 Hz, 1 Ph   SELECT  
 96004      -    Stand-alone  External exhaust  110-120V, 60 Hz, 1 Ph   SELECT  
 96005      -    Stand-alone  Remote exhaust  110-120V, 60 Hz, 1 Ph   SELECT  
 9600322      -    Stand-alone  Recirculating  220-240V, 50/60 Hz, 1 Ph   SELECT  
 9600422      -    Stand-alone  External exhaust  220-240V, 50/60 Hz, 1 Ph   SELECT  
 9600522      -    Stand-alone  Remote exhaust  220-240V, 50/60 Hz, 1 Ph   SELECT  

Details All Product Numbers

Benchtop Model Specifications : -
Dimensions (H x W x D) : Overall: Recirculating: 45.75” x 48” x 28” (116.2 x 121.9 x 71.1 cm) External: 52.75” x 48” x 28” (134 x 121.9 x 71.1 cm) Remote: 52.75” x 48” x 28” (134 x 121.9 x 71.1 cm) Work Surface Height: 1.75” (4.4 cm) above benchtop Recommended Depth: 29” (73.7 cm) from front of unit to wall Right-Hand Sink: 18” x 6” x 4” (45.7 x 15.2 x 10.2 cm)
Weight : Uncrated: 300 lbs. (136.1 kg) Crated: 350 lbs. (158.8 kg)
Electrical Specifications : • One IEC 320 Power Entry Module and one point-of-use power cord. • 110-120V and 220-240V models require facility receptacles with 15 amp circuits for each power cord. • 110-120V models draw 15 amps including the two hospital-grade duplex ground fault circuit interrupter (GFCI) receptacles. • 220-240V models draw 15 amps including the four IEC 320 receptacles with facility-supplied residual current device (RCD) protection required.
Plumbing Specifications : • One 1/2” industrial-grade flexible hose with 3/4” female hose fittings is supplied for connection to cold water supply lines. • One 3/4” NPT connection and 1” I.D. reinforced flexible hose is supplied for connection to facility drain line.
____________________ : ____________________
Stand-alone Model Specifications : -
Dimensions (H x W x D) : Overall: Recirculating: 78.5” x 48” x 28” (199.4 x 121.9 x 71.1 cm) External: 85.5” x 48” x 28” (217.2 x 121.9 x 71.1 cm) Remote: 85.5” x 48” x 28” (217.2 x 121.9 x 71.1 cm) Work Surface Height: 36” (91.4 cm) Recommended Depth: 29” (73.7 cm) from front of unit to wall Right-Hand Sink: 14” x 12” x 9.75” (35.6 x 30.5 x 24.8 cm)
Weight : Uncrated: 500 lbs. (226.8 kg) Crated: 600 lbs. (272.2 kg)
Electrical Specifications : • Two IEC 320 Power Entry Modules and two point-of-use power cords. • 110-120V and 220-240V models require facility receptacles with 15 amp circuits for each power cord. • 110-120V models draw 15 amps including the two hospital-grade duplex ground fault circuit interrupter (GFCI) receptacles. • 220-240V models draw 15 amps including the four IEC 320 receptacles with facility-supplied residual current device (RCD) protection required.
Plumbing Specifications : • Two 1/2” industrial-grade flexible hoses with 3/4” female hose fittings are supplied for connection to cold and hot water supply lines. • 1 1/2” I.D. reinforced flexible hose is supplied for connection to facility drain line.