This sampler can be used as a stand-alone sampling device or as a primary in a multi-stage mechanical sampling system. Direct increments are obtained from in-motion, horizontal or inclined conveyors. It is ideally suited for the sampling of coal, limestone, ferrous and non-ferrous ores, sand, crushed rock and gravel. In high tonnage applications, the cutter is counterbalanced to prevent excessive stress on the conveyor.

Features and Benefits

• Compact design is well-suited for low headroom installations.
• Ease of installation results in modest installation costs.
• Mounts directly to existing or new conveyors. No transfer point is required.
• Rigid construction of tubular structural steel maintains positive alignment.
• Direct drive for positive stopping whether the belt is loaded or empty.
• Skirtboards on sampler prevent material spillage.
• Cost efficient. Small primary increment means smaller, less expensive equipment in the reduction stages of system.
• Non-contact proximity switches for start-stop control.
• Replaceable steel brushes and urethane wiper assure fines will be removed and included in representative sample.
• Samplers counterweighted to eliminate high eccentric loading on 36" and larger belts.